Hiserialport For Mac
Document Type Revision File Datasheet 1.20 Quick Start Guide 1.20 Driver.QTY = 10,. The USB2-H-5002 is a USB to a dual interface RS485 level serial UART adaptor incorporating Hi-Speed USB2.0 (480 Mb/s) to dual serial UART interface IC device. The FT2232H handles all the USB signaling and protocols. The adaptor provides a fast, simple way to connect devices with an RS485 interface to USB.
The integrated electronics of the USB2-H-5002 utilise the and includes RS485 level shifters plus TXD/RXD LEDs to provide a visual indication of data traffic through the adapter. Flexible mounting allows the USB2-H-5002 to be used in a variety of applications, from a portable adapter to accompany a laptop to permanent installations in industrial, commercial and retail locations. The enclosure incorporates a standard USB-Mini-B client connector for connection to an upstream host or hub port. RS485-level signals are available on two industry-standard DE-9P (DB9) connectors. The maximum RS485-level data rate is 10 Mbps. The USB2-H-5002 adapter require USB device drivers, available free from which are used to make the USB2-H-5002 appear as a Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal, to exchange data through the USB2-H-5002 to a legacy RS485 peripheral device.
Pin 9 of the D-sub connector can provide +5 V power output with maximum 250 mA. Features: Adds dual RS485 serial port by connecting to a USB 2.0 Hi-Speed interface.
Echo and non-Echo modes selection. Easy plug & play installation and RS-485 device connection Works with USB 1.1 & 2.0 Host and Hub ports Industry Standard chip set & device drivers for maximum compatibility Microsoft Windows® WHQL-certified, Mac OS X, Linux and Windows CE device drivers downloadable for free Installs as a standard Windows COM port COM Port Number assignment is configurable FIFO: 4k byte transmit buffer, 4k byte receive buffer RS485 data signals: Data+, Data-, GND Powered by USB port. No external power adapter required Pin 9 of DE-9P (DB9) can provide +5 VDC output at 250 mA (total on 2 ports) Serial port speed up to 8 Mbps Serial Communication Parameters o Parity: None, Even, Odd o Data bits: 7, 8 o Flow control: X-ON/X-OFF, None Dual DE-9P (DB9) male connector LEDs indicate USB Enumeration, RxD, TxD for monitoring port status & easy diagnostics Operating temperature of -40°C to +85°C USB cable of 0.9 meter included FCC and CE approved.
Document Type Revision File Datasheet 1.01 Quick Start Guide 1.0 Driver.QTY = 10,. The provides a simple method of adapting legacy serial devices with interfaces to modern USB ports. This is accomplished by incorporating the industry standard Hi-Speed USB-Serial bridge chip. Each adapter contains a small internal electronic circuit board which utilises the, mounted inside a rugged plastic enclosure capable of withstanding industrial temperature ranges. The integrated electronics also include level shifters and TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
Flexible mounting allows the to be used in a variety of applications, from a portable adapter to accompany a laptop to permanent installations in industrial, commercial and retail locations. The enclosure incorporates a standard USB-miniB device connector for connection to an upstream host or hub port. RS232-level signals, including modem handshake signals, are available on an industry-standard DE-9P (SB9) connector.
Serial Port For Mac
The maximum RS232-level data rate is 1 Mbps. The adapter requires USB device drivers, available free from, which are used to make the appear as two Virtual COM Ports (VCP). This allows existing serial communications software, such as HyperTerminal, to exchange data through the to two RS232 peripheral devices.